News

Pay attention to news and information, understand industry trends

Choosing a Waterproof Shade Sail

Date:2022-08-09
When choosing a shade sail for your outdoor space, consider the material. The most common material for shade sails is waterproof PVC fabric. This type of material is composed of polyester yarn, which is coated with a protective layer of Poly Vinyl Chloride (PVC). The PVC helps protect the fabric from wind and rain, while plasticizers give it flexibility and make fabrication easy. PVC manufacturers offer five to six grades. Fabric weights range from 400 to 1500 gsm.
When choosing a Shade Sail, remember that you should choose one with adequate slope. A 15-foot shade sail has a slope of 5.25 feet. The two points on opposite sides should be at least five feet 3 inches lower than each other to allow water to run off. The shade sail should have strong fixing points that can handle any storms that may occur in the area. To choose the best shade sail for your outdoor space, consult a shade sail manufacturer's instructions.
The best way to clean your shade sail is to wipe it down with a soft-bristled brush and a bucket of water. High-pressure water cleaners are also a good option, but use them only on low settings. Never use strong detergents, as they can damage the shade sail fabric. Allow up to 24 hours for the fabric to dry before you hang it up again. It is also recommended to remove water from the shade sail to avoid possible damage.
When purchasing shade sails, ensure that you get the right size and design. Most shade sails are available in a variety of sizes and colors. The smallest, six-foot-long shade sail covers a space that is sixteen x 20 feet. They are made from HDPE material, which protects the shade sail against 95% of the sun's harmful rays. A shade sail will not sag and will not wrinkle if it is installed correctly.
A waterproof shade sail can be placed around a swimming pool or playground. Waterproof shade sails are also suitable for office buildings. They come in different colours and types, making them an attractive extension of the building's overall design. They are ideal for homes with active kids, but do require additional rope or hardware to hang properly. The shade will remain intact even in rainy weather. When installed properly, a waterproof shade sail will protect against sun rays and add aesthetic value to your outdoor area.
A waterproof shade sail is ideal for areas exposed to rain. Not only will it protect your outdoor furniture from rain, but it will also provide better weather protection for your furnishings. It will also keep UV rays from damaging your items. If you own expensive outdoor furniture or an expensive outdoor game room, you should invest in a waterproof shade sail. If you have a sensitive piece of furniture, this is the best option for protecting it from the rain.
A Waterproof Shade Sail can be attached to the roof of your house or an outdoor structure. The attachment process is easy to complete and will keep the shade sail tight, preventing rainwater runoff and eliminating puckers. The fixings must be durable enough to withstand strong winds. The best option is a shade sail that is attached to a structure, such as a shed. The shade sail should be smaller than the roof of your home. The shade sail should not exceed 20 square meters.


HDPE Square Waterproof Sun Shade Sail

Specification
1.Material: HDPE
2.Shade rate: 85-90%
3.Different colors and sizes are according to customer's requirement
4.At least 5 years life time with a UV protection up to 90%
5.Stainless steel rings at each corner
6.webbing along the whole edge

Protects from harmful UV rays and direct sunlight exposure. Blocks harmful rays of the sun without trapping hot air beneath. Fabric has high density breathable blockage, while effectively reducing heat, blocking up to 95% of UV rays, and protecting skin.

Widely used for a patio, lawn, garden, pool, bbq areas,pond, deck, courtyard, backyard, dooryard, park, carport, pergola, sandbox, driveway or other outdoor occasions.